MAGNUM

MODEL 4436-4

Machine Options

	Blow-Off Nozzle Kit
	Air-Line Moisture Trap
	20" Set-In Turntable
	2 Gallon Tumble Basket

Media Blast Gun:

Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.

5/32" air jet supplied as standard. 1/8" - 3/16" air jets with sized nozzles supplied upon request.

Reclaimer: High performance 400 or 600 CFM cyclone type reclaimer separates good media from dust and by products.
Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and reclaim.
Viewing Window: Large 12"X20" tempered glass provides long life and minimizes static build up of dust.
Door Latch: Heavy-duty cam type, adjustable for positive door seal.
Glove Arm Hole: Heavy-duty cloth lined vinyl gloves are snap-in and quick changing, allowing easy access of handling parts in blast chamber.
Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
Clean out door: Allows recovery of small parts that may fall from blast chamber.
Safety Foot Control: Floating foot control.
Doors: Large double walled doors (both sides) for opening size see figure "C". Knife sealing edge assures positive seal in blast chamber.
Motor: 400 CFM, 1/2 HP, 120 VOLTS, 11 AMP, 3450 RPM or 600 CFM, 1 HP, 120 VOLTS, 16 AMP, 3450 RPM.
Dust Collector: Cotton sateen dust bag collects dust from reclaimer. Zipper in bottom for emptying dust and debris. Optional dust collector available.
Fill Door: to add media to machine and remove debris from debris screen basket inside reclaimer.
Sump Hose: 4" flexible duct hose, from machine sump outlet to reclaimer inlet.
Media Valve: Universal feed allowing all types of abrasives to be used. 2" plug outlet for easy clean out.
Media Hose: 1/2" media hose, from media valve to bottom fitting on blast gun.
Compressed Air Inlet: 1/2" coupler for easy installation of optional moisture trap.
Mylar Dispenser: Holds roll of mylar to protect viewing window. (not shown).

Suction Gun Air Requirements	Gun#	40 PSI	60 PSI	80 PSI
1/4" Nozzle - 1/8" Air Jet	#4	12 CFM	17 CFM	21 CFM
5/16" Nozzle - 5/32" Air Jet	#5	19 CFM	27 CFM	34 CFM
3/8" Nozzle - 3/16" Air Jet	#6	27 CFM	37 CFM	47 CFM

Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.

Packing: Machine secured on wood pallet for shipping. Machine is wrapped in clear plastic.