LB 4024

Machine Construction: Heavy 14 gauge welded steel construction. Two coats of industrial quality paint.

1. Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
   
    
2. Light Box: Two (2) tube 24" fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
   
    
3. Viewing Window: Large 12"X20" tempered glass provides long life and minimizes static build up of dust.
   
    
4. Door Latch: Heavy-duty cam type, adjustable for positive door seal.
   
    
5. Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing. 
   
    
6. Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
   
    
7. Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
   
    
8. Safety Foot Control: Prevents accidental blast operation.
   
    
9. Doors: Large double walled doors (both sides) for opening size see figure "C". Knife sealing edge assures positive seal in blast chamber.
   
    
10. Shaker Handle: Handle for shaking dust from cartridge
    
     
11. Cartridge: 8 1/2" x 9 1/2" cartridge with 175 2" pleats
    
     
12. Dust Sump: Allows dust to flow directly into waste container.
    
     
13. Media Hose: 1/2" media hose, from media valve to bottom fitting on blast gun.
    
     
14. Media Valve: Universal Feed allowing all types of abrasives to be used. 2" plug outlet for easy clean-out.
    
     
15. Motor: 120 volt, 15 amp switch control.
    
     
16. Compressed Air Inlet: 1/2" coupler for easy installation of optional moisture trap.