Machine Construction:

 Heavy 14 gauge welded steel construction.

Two coats of industrial quality paint.

Packing: Machine secured on wood pallet, dust collector packed inside blast chamber for shipping.

Machine is wrapped in clear plastic.

1. Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.
   
    
2. Light Box: Two (2) tube 24" fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.
   
    
3. Viewing Window: Large 12"X20" tempered glass provides long life and minimizes static build up of dust.
   
    
4. Door Latch: Heavy-duty cam type, adjustable for positive door seal.
   
    
5. Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
   
    
6. Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
   
    
7. Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
   
    
8. Manual Foot Control: Manual control of blast through a full flow valve.
   
    
9. Doors: Large double walled doors (both sides) for opening size see figure "C". Knife sealing edge assures positive seal in blast chamber.
   
    
10. Shaker Handle: Handle for shaking dust from cartridge.
    
     
11. Cartridge: 8 1/2" x 9 1/2" cartridge with 175 2" pleats.
    
     
12. Dust Sump: Allows dust to flow directly into waste container.
    
     
13. Media Hose: 1/2" media hose.
    
     

14. Media Valve: Adjustable media valve.
     

15. Motor: 120 volt, 15 amp switch control.
    
     
16. Pressure Pot: ASME Coded, one cu. ft. capacity. Air pressure, regulator / filter.  Adjustable media valve.  Manual blow down.