Media Blast Gun:

Lightweight aluminum pistol grip for long life. Interchangeable air jets and nozzles for various air supplies and media flow.

1/8" air jet supplied as standard. 5/32"  - 3/16" air jets with sized nozzles supplied upon request.

1. Dust Collector: 100 CFM cartridge type collector for better dust control providing cleaner working chamber.

2. Light Box: Two (2) tube 24: fluorescent light, for best possible lighting in blast chamber, On-Off control switch for light and cartridge dust collector.

3. Viewing Window: Large 12"X20" tempered glass provides long life and minimizes static build up of dust.

4. Door Latch: Heavy-duty cam type, adjustable for positive door seal.
    

5. Glove Arm Hole: Heavy duty cloth lined vinyl snap-in gloves are quick changing.
    

6. Air Flow Regulator and Gauge: Allows adjustable air pressure to gun for proper media flow to provide finish desired.
    

7. Clean out door: Easy access to filter screen, trapping heavy particles form abrasives. Allows recovery of small parts that may fall from blast chamber.
    

8. Safety Foot Control: Prevents accidental blast operation.

9. Doors: Large double walled doors (both sides) for opening size see figure "C". Knife sealing edge assures positive seal in blast chamber.
    

10. Shaker Handle: Handle for shaking dust from cartridge.
     

11. Cartridge: 8 1/2" x 9 1/2" cartridge with 175 2" pleats.
     

12. Dust Sump: Allows dust to flow directly into waste container.

13. Media Hose: 1/2" media hose, from media valve to bottom fitting on blast gun.

14. Media Valve: Universal Feed allowing all types of abrasives to be used. 2" plug outlet for easy clean-out.

15. Motor: 120 volt, 15 amp switch control.
     

16. Compressed Air Inlet: 1/2" coupler for easy installation of optional moisture trap.