WARNING

DO NOT USE SAND.  SAND WILL CAUSE SILICA DUST, WHICH IS THE CAUSE OF SILICOSIS DISEASE, A CONDITION OF MASSIVE FIBROSIS OF THE LUNGS.  THIS STATEMENT INDICATES POTENTIAL PERSONNEL HAZARD.  FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONNEL INJURY.

WEBSITE FOR SILICOSIS: 

http://www.osha.gov/Silica/IT69D_1.html

 

Fortress Respiratory Protector

The Fortress Respiratory Protector can process up to 50 cfm of air through a four stage filtration system.

Stage One and Two remove moisture, oil mist and particulates. Stage Three removes odors through an activated charcoal bed and Stage Four converts small amounts of Carbon Monoxide to Carbon Dioxide through patented technology.

A built-in Carbon Monoxide monitor, powered by multiple sources, samples the air for residual CO and will alarm if the volume exceeds allowable levels. The durable, plastic, safety orange enclosure provides portability or mounting capability and protects the components from the elements.


 

• FEATURES:
 
bullet

Multiple power sources available: 12 Volt DC, 120 Volt AC

bullet

9 Volt battery and nickel cadmium battery

bullet

Converts small amounts of Carbon Monoxide to Carbon Dioxide

bullet

4-Stage filter system

bullet

Remote warning devices available

bullet

50cfm capacity

 

   
Fortress Respiratory Protector
Part # Description
011917 50cfm - Respiratory Protector

 

 

 

 

Fortress Replacement Kit

Blast-It-All® carries the following replacement filter kit for use with our Fortress Respiratory Protector.


• INCLUDES:

bullet Stage 1 & 2 - water/oil coalescing  
bullet Stage 3 - charcoal odor removal  
bullet Stage 4 - catalyst conversion element

Requirements for operation:
Grade D quality breathing-air at minimum pressure required by respirator and maximum pressure of 125psi.
 

Replacement Filter Kit
Part # Description
011918 Fortress Replacement Filters

Fortress Calibration Kit

Keep your Fortress Respiratory Protector functioning properly with our Fortress Calibration Kit.

• Includes:
 
bulletSpan gas - 95 ppm
bulletZero gas included
bulletPotentiameter tool
bulletFlow valve & tubing
bulletPlastic carrying case
bullet5-6 calibrations per kit

Requirements for operation:
Grade D quality breathing-air at minimum pressure required by respirator and maximum pressure of 125psi.
 
Fortress Calibration Kit
Part # Description
011919 Calibration Kit - up to 6 calibrations
(includes: Span Gas, Zero Gas, necessary hook-up fittings & plastic carrying case)
1050105 Span gas cylinder - 95ppm
1050106 Zero gas cylinder - 0ppm