BAG COLLECTORS
STANDARD DUST BAGS
MATERIAL: COTTON SATEEN
WEIGHT 9.6 OZ PER SQ YD.
THREAD COUNT: 96 X 60
AIR PERMEABILITY: 10 TO 20 CFM
CONSTRUCTION: ALL SEAMS OVERLAP
ATTACHMENT: SCREW TYPE CLAMP
(11-415) DUST BAG 300 - 400 CFM (18" DIAMETER X 56" LONG)
SINGLE BAG CONSTRUCTION
5" INLET 25 SQ FT OF FILTRATION
(11-715) DUST BAG 600 - 700 CFM (18" DIAMETER X 70" LONG)
DOUBLE BAG CONSTRUCTION
6" INLET 30 SQ FT OF FILTRATION
PUSH IN DUST COLLECTOR
(AFTER FILTER)
THIS TYPE COLLECTOR CONNECTS TO THE OUTLET SIDE OF THE RECLAIM FAN BY A FLEXIBLE DUCT. THE INLET OF THE COLLECTOR HAS A DAMPER FOR BALANCING THE AIR FLOW FROM THE RECLAIM. BLASTING BY-PRODUCTS ARE COLLECTED IN A SERIES OF VERTICALLY ATTACHED COTTON SATEEN DUST BAGS. DUST IS SHAKEN FROM THE BAGS BY A MANUAL MOUNTED HAND SHAKER. DUST REMOVED BY THE SHAKING PROCESS IS DEPOSITED IN A DUST DRAWER AT THE BOTTOM OF THE COLLECTOR.
300 / 400 CFM - (18) - DUST BAGS (11-364)
600 / 700 CFM - (30) - DUST BAGS (11-364)
900 CFM - (42) - DUST BAGS (11-364)
PULL THROUGH BAG COLLECTOR
D SERIES COLLECTORS
TWO SIZES ARE AVAILABLE D-10 & D-20
BLASTING BY-PRODUCTS ARE COLLECTED IN A SERIES OF VERTICALLY MOUNTED, CLOSED END, DUST BAGS SUSPENDED ON A SPRING MOUNTED HOLDER. THE DUST BAGS ARE HOUSED IN A METAL CABINET CONSTRUCTED OF HIGH QUALITY STEEL, WITH A CORROSION RESISTANT ENAMEL FINISH. DUST IS SHAKEN FROM THE BAGS BY A HIGH FREQUENCY VIBRATOR MOUNTED ON THE BAG HOLDER. STANDARD CONTROL OF THE SHAKER MECHANISM IS BY A MANUALLY OPERATED AIR SWITCH, OR BY AN OPTIONAL AUTOMATIC SHAKER CONTROL. DUST REMOVED BY THE SHAKING PROCESS IS DEPOSITED IN THE DUST SUMP. DUST AND BLASTING BY-PRODUCTS ARE EASILY REMOVED FOR DISPOSAL BY A SLIDE VALVE LOCATED AT THE BOTTOM OF THE SUMP.
D-10 PULL THROUGH:
FOR (700CFM) RECLAIMER
42" W X 25" D X 80" H
1 HP MOTOR
MANUAL PNEUMATIC BAG SHAKER
25 DUST BAGS (11-349)
D-20 PULL THROUGH:
FOR (900CFM) RECLAIMER
52" W X 33" D X 80" H
2 HP MOTOR
MANUAL PNEUMATIC BAG SHAKER
49 DUST BAGS (11-349)
PLEASE CALL TOLL FREE: (800) 535-2612 FOR MORE INFORMATION
