* SHOWN WITH OPTIONAL VERTICAL DOOR
TURNTABLE & TRACK - RPJH-2 DUST COLLECTOR
|
MODEL |
RECLAIM |
MOTOR |
DUST |
WORK |
WORK |
WORK |
SYSTEM |
|
BIA60-1 |
900 CFM |
2 |
DUST BAGS |
60" |
60" |
53" |
96" |
|
BIA60-2 |
900 CFM |
2 |
D-20 |
60" |
60" |
53" |
96" |
|
BIA60-3 |
900 CFM |
2 |
RPJ-2 W/DRAWER |
60" |
60" |
53" |
90" |
|
BIA60-4 |
900 CFM |
2 |
RPJH-2 W/HOPPER |
60" |
60" |
53" |
12'6" |
|
BIA60-5 |
1200 CFM |
5 |
RPJH-2 W/HOPPER |
60" |
60" |
53" |
12'6" |
|
BIA60-6 |
1800 CFM |
5 |
RPJH-4 W/HOPPER |
60" |
60" |
53" |
12'6" |
|
BIA72-1 |
900 CFM |
2 |
DUST BAGS |
72" |
72" |
56" |
96" |
|
BIA72-2 |
900 CFM |
2 |
D-20 |
72" |
72" |
56" |
96" |
|
BIA72-3 |
900 CFM |
2 |
RPJ-2 W/DRAWER |
72" |
72" |
56" |
90" |
|
BIA72-4 |
900 CFM |
2 |
RPJH-2 W/HOPPER |
72" |
72" |
56" |
12'6" |
|
BIA72-5 |
1200 CFM |
5 |
RPJH-2 W/HOPPER |
72" |
72" |
56" |
12'6" |
|
BIA72-6 |
1800 CFM |
5 |
RPJH-4 W/HOPPER |
72" |
72" |
56" |
12'6" |
 |
|
|||||||||||
|
OPERATION: The BLAST-IT-ALLŪ Cube is designed
and equipped to effectively blast large items with a variety of blasting
media. High static fans available for heavy media. The operator accesses the
blast area from outside the Cube through glove ports to direct blast pattern
at the items. Blast pattern may be from a venturi suction gun or pressure
blast. CABINET: Constructed of high quality reinforced steel. WORK SURFACE: Heavy duty removable grate of 9 gauge, flattened, expanded metal. DOOR: One, full opening, double walled, swing type. Full perimeter gasket with knife edge sealing. Self adjusting door latches. GLOVES: Full length, cloth lined, abrasive and static resistant. Screw clamp mounted, for easy replacement, to a 10" elongated, padded port. WINDOW: Large, 12-1/2" x 21", tempered glass provides long life and minimized static build up of dust. LIGHT: One, 4 tube 48" flourescent fixture, shielded, and externally located on top of the machine. |
CONTROLS: Dual on/off switches for blower and
lights. Safety Door Switch allows blasting only when the door is closed.
Blast is controlled by a foot activated control. BLOW-OFF NOZZLE: A fingertip controlled air blow-off nozzle allows cleaning of the work inside the cabinet. HOSES: All air and media hoses are lightweight, flexible, and abrasive resistant. Flex hose is abrasive and static resistant. ELECTRICAL: A 230/460 Volt, 60 Hz, 3 Phase, service is required. Alternate voltages are available. NOTE: Specify voltage on purchase order. PAINT: A durable corrosion resistant enamel, grey in color, is used internally and externally. OPTIONS: Options available for the Cube are: Wear Kits Additional Swing Door Additional Work Stations Vertical Door(s) Additional height required Set-in Turntables Turntables and Track assemblies Service Door (3x3) Sound Suppressors Hepa After Filters |
 |
 |
|||||||||||||||||||||||||||||||||||||
|
VENTURI SYSTEM: A lightweight, aluminum, pistol grip design, suction feed, gun is supplied. A No. 5 air orifice and No. 5 ceramic nozzle are installed as standard, other orifice and nozzle sizes are available depending upon compressed air supply. Carbide nozzles are also available. Media/Air blast ratio is obtained by a fixed media feed valve. Pictured with D20 Dust Collector. |
PRESSURE SYSTEM: A one (1) Cu. Ft. capacity, ASME certified pressure pot is supplied. Pot is equipped with 3/4" piping, pilot/slave regulator, moisture separator, outlet valve, media valve, and all related controls for efficient operation. Blast is delivered to the part through 1/2" blast hose and a 1/4" Tungston Carbide nozzle. Pictured with D20 Dust Collector. | |||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||
| RECLAIM SYSTEM: High efficiency centrifugal, cyclone type, with an adjustable air wash and trash screen to trap large debris. A high performance blower is used to convey media and blasting by-products to the reclaim for separation. | ||||||||||||||||||||||||||||||||||||||
|
CARTRIDGE DUST COLLECTOR: |
PLEASE CALL TOLL FREE: (800) 535-2612 FOR MORE INFORMATION
