| WARNING |
DO NOT USE SAND. SAND WILL CAUSE SILICA DUST, WHICH IS THE CAUSE OF SILICOSIS DISEASE, A CONDITION OF MASSIVE FIBROSIS OF THE LUNGS. THIS STATEMENT INDICATES POTENTIAL PERSONNEL HAZARD. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONNEL INJURY.
WEBSITE FOR SILICOSIS:
http://www.osha.gov/Silica/IT69D_1.html
Barricade CO Monitor
Ensuring the quality
of air supplying your respirator is made simple with the Barricade Carbon
Monoxide (CO) Monitor.
The Barricade will detect Carbon Monoxide levels less than 1 part per million
(PPM) and alerts you with a 105-decibel audible alarm and visual indicator when
it exceeds the allowable level. The Barricade is equipped with an easy-view LCD
screen that displays the amount of CO present in the air. The unit can be
powered with 12 Volt DC or 120 Volt AC. If you are working far from the unit, up
to 250 feet, utilize the optional remote Strobe and Alarm.
The unique Alarm Silencer allows for temporary quieting of the audible alarm for
up to 4 minutes. This gives you time to investigate the source of the CO but
never disconnects power to the instrument.
" FEATURES:
 | Alarm silencer allows you to quiet the instrument while troubleshooting |
| Multiple power sources: 12 Volt DC and 120 Volt AC |
| Heavy-duty air inlet fitting |
| Remote strobe and alarm available |
| Easy to calibrate |
| Water and corrosive resistant case |
| Visible LCD display |
| Audio and visual alarm |
|
Barricade CO Monitor |
|
| Part # | Description |
| 002641BM | Barricade CO Monitor |
| 002641DC-CORD | Barricade CO Monitor with 12 Volt DC cord |
| 002641BMCORD | Barricade CO Monitor with 120 Volt AC cord |