BARREL BLASTER

MODEL BB-2 SHOWN

1. CABINET:  Constructed of high quality 12 gauge steel.

2. BARREL:   Constructed of 11 gauge steel.  Access to parts loading and unloading is through a removable door, held in place by cam type clamps for security.

3. CABINET DOOR:   One, full opening, swing type mounted on heavy duty hinges.

4. GUN:   The BB - 2 uses two (2) stationary production style guns, suction feed.  A number six air orifice and carbide nozzle is installed as standard, other sizes and types are available depending upon compressed air supply (see chart).  All hoses are 5/8" ID, lightweight, clear, flexible and abrasive resistant.  Media / Air blast ration is obtained by a fixed media feed valve.

5. RECLAIM SYSTEM:   High efficiency centrifugal type, with an adjustable air wash and trash screen to trap large debris.  A high performance blower is used to convey media and blasting by-products to the reclaim for separation.

6. DUST COLLECTION:  A large capacity Dust Collector, Model D10 is used.  This pull through dust collector has a dust bin located at the bottom of the bag holder and allows for easy removal of blasting by-products.  A high static exhauster, located on the clean air side of the filters, is powered by a 1 HP electric motor and rated at 700 CFM of air flow.